Welcome to Tensolo Music Co. | Contact Us! - sales@tensolo.com

JTC Drum & Loop PRO (NDL-5) Dual Switch Looper Pedal + Free Shipping
JTC Drum & Loop PRO (NDL-5) Dual Switch Looper Pedal + Free Shipping
JTC Drum & Loop PRO (NDL-5) Dual Switch Looper Pedal + Free Shipping
JTC Drum & Loop PRO (NDL-5) Dual Switch Looper Pedal + Free Shipping

NUX JTC Drum & Loop PRO (NDL-5) Dual Switch Looper Pedal

Fornecedor
NUX
Preço normal
Esgotado
Preço promocional
R$ 857,00

Quantidade deve ser 1 ou mais

JTC Drum & Loop PRO (NDL-5) Dual Switch Looper Pedal

High Quality Recording and Big Storage

JTC Pro is an advanced pedal with simplified controls. It’s a dual switch stomp box pedal with 6 hours of recording capability and 256 loop track memories. And the audio recording quality is 24-bit and 44.1 kHz sample rate.

Dual-Switch Action

Loop and the drum controls are separated, left footswitch (LOOP) controls recording and overdubs, and start/stop plays the recorded loop tracks. It’s also TAP Tempo control, you can set the drum speed by tapping the left footswitch before you record a track.

Looper Action

There are 2 loop recording actions on JTC Pro; Record and Play (RP), and Record and Overdub (RD).

In Record and Overdub action; JTC Pro will record it over and over while playing the previous tracks

High Quality Drum Sound - Smart Drum Fills

Right footswitch (RHYTHM) controls the drum and it adds a drum fill during the performance. Drum fills length is one measure (depends on 4/4 or 3/4 rhythms). When you hit the RHYTHM button, drum fill will start immediately and it will play until the end of the current bar. For example if you push the switch at 3rd beat -> drums fill length will be 2 beats only.

There are 40 drum patterns and fills including Pop, Rock, Blues, Metal and more other styles with 3/4 and 4/4 beats.

Start/Stop Modes

It has very useful and stop modes for making your jam sounds like an arranged song during the performance. There are 2 Start Modes and 3 Stop Modes;

Start Modes

Press and hold the Stop Modes button, and select a start mode; (Ar) Auto-Recording, (Nr) Normal Recording

Normal Recording - Classic hit and play looper action. JTC Pro will start recording when you push the loop switch.
Auto-Recording - In this mode, when you push the loop switch, the JTC Pro will be standing by for recording. And it will start recording immediately when you hit the guitar strings.

Stop Modes

After you record a track, you can simply push the Stop Modes button, and choose one of the modes to finish your performance the way you like.

Normal Stop - Double hit to Loop switch and the looping track will stop immediately.

Fine Stop - Double hit: The track will play until the end then it will stop, don't forget to hit finishing chord after it stop.
Fade Out - The track volume will be decreased to 0 slowly in 10 seconds then it will stop.

ONE-SHOT Mode

And, One Shot mode is very useful for playing any loaded backing track without looping. You can load any song to play along, the supported file type is 24-bit 44.1 kHz Stereo Wave (.wav)

You can download NUX Audio File Converter to change the audio file format and make it compatible for JTC Pro. (It doesn't process the audio signal, it changes the file ID and JTC Pro can recognize the file to play. Main file must be wav or mp3 format, please check the support page for converter guide)

Advanced Output Options and Frequency Optimization (FR ON/OFF)
JTC Pro has 2 outputs and there are several output modes; a stereo connection to two amplifiers, or you can activate the built-in speaker cabinet simulation for Right Output to send your guitar signal directly to a PA system (or any PA monitor).

JTC Pro’s drum sound is high quality real sound, when you connect to any guitar amplifier or PA system you will hear a full range and dynamic drums, still, if you are using a small practice amplifier there is an optional drum frequency optimization. It makes the drum sounds more clear and helps you to get a real looper experience with the smaller amplifiers.

You will find a guide about Output routing and Frequency Optimization on the support page.

External Footswitch Input

You can connect NUX NMP-2 control footswitch (sold separately) or any equal pedal to use as a controller. You can switch Up and Down between the memory slots.

When you push the UP or DOWN button, the current track will be played until the end, you can switch right next to preset or jump between several presets at once.

Specs:

  • 24-bit audio quality
  • 6 hours recording time
  • 256 memories
  • Drums
  • 25 4/4 beats, 10 3/4 drum beats, 5 shuffle beats
  • Drum tempo 40-240
  • 2 start modes, 3 stop modes
  • One Shot player
  • 2 Loop switch modes
  • Record-Play and Record-Overdub
  • Optional drum sound enhancement
  • 2 Outputs, Right Output speaker emulated (optional)
  • 3 Output modes
  • Guitar to L and Drums to R, Guitar and Drums to R/L, Guitar and Drums to R and Drums to L
  • External footswitch input to switch between loop phrases. (NMP-2 optional)
  • Micro-B USB input
  • 9 V negative tip power input

Shipping: Free Shipping!

In the Nashville Metro area? Local pickup available! Email sales@tensolo.com to set up an appointment for pickup. If close enough, we will deliver! 

Tax Advisory: Tennessee residents will be charged a sales tax of 9.75% on the purchase. Since we are a TN-based business and only have a nexus presence in TN, we have to charge tax for TN residents only. Other states, unless executed differently by their state government to charge taxes on online purchases, are exempt from paying taxes on Tensolo Music Co. purchases.

Please feel free to email sales@tensolo.com with any questions.

Tensolo Music Co. is a NUX Authorized Dealer!

Interested in the NUX JTC Drum & Loop PRO (NDL-5) Dual Switch Looper Pedal? We have a very flexible return policy. Customer Satisfaction is our number one priority!